Ceramic tile grid printed on how to deal with

Floor tile surface in addition to the pinhole, crack, seepage pollution problems, such as a headache, let a person have a let everybody more headaches is checked. All glazed ceramic, polished tile, glazed archaize brick are likely to appear this kind of circumstance. Is that the surface of the brick have another piece of brick tile background imprint on surface. （ Ceramic tile grid) This mark is difficult to handle, using oxalic acid, alcohol, detergents, toluene, sawdust, white cement removal. Some water mark yituo, did not have, water is displayed again. Some see no positive side and very clear. Grid printing can be divided into two cases collected from the market, small make up think this plaid print can be divided into two situations: 1, the floor tile delivery to site, not processed, the shop is stuck, it found that printed brick with grid, this kind is often found on the polished tile, glazed archaize brick. Some small floor tile also happened. Before 2, floor tile from factory to site to processing, processing usually when there is water, the glazed ceramic has a protective film, also can be torn off, after processing, imprint in the grid. Discovered, such as many dealers and manufacturers will go to the warehouse with a batch of goods, found that the goods in the warehouse and printing no grid, that is not apparent until should be processed. Some dealers, a group of brick to the same site, processed bricks have plaid print, without processing of brick no grid. Causes of grid printed about the causes of grid printing, small make up also consulted many friends, each have each, is also not a very precise reason, sort out today and for your reference. 1, some people think, that without seal processing was found grid, should be a brick in the process of production, probably the cargo, the brick no cooling, packaging, and packed some adobe bricks, brick and temperature at this moment, the adobe grain is printed to another piece of brick on the coating or on the surface of the glaze. 2, some friends think that this should be antifouling wax appear problem, whether this brick make temperature, when the slab bottom surface contact and brick, squeezing and brick pile up and gravity, the brick tile background is printed to the surface. 3, for the printing processing before did not show grid, the reason why the printing processing appear grid is difficult to explain. Some friends of speculation is printed on the grid didn't have before processing, a processing after a meet water, is displayed. Some friends guess this grid printed before the processing is not originally, but later processing, processing factory finished cutting, pressure is usually when putting green brick tile, at this time then, plaid print another piece of brick surface. Grid printed removal method of how to solve the grid printed on the surface of the tile? Old pottery personally. The grid if not obvious, will not affect the use, suggest it. May be with the passage of time, the surface after the antifouling layer gradually wear off, the grid printing may fade disappear. （ , of course, have a plenty of shop wall, no friction, might not disappeared) 。 If the grid printed clearly, want to remove, is not can't, but it's very trouble! Printing to remove such grid, will ask professional person to, slightly to cast a layer of the surface of the brick, then do anti-fouling processing, polishing again. The method is suitable for use in all glazed ceramic, polishing brick, originally do coating the surface of the floor tile. It is not applicable for the glazed tile. This method actually and stone renovation of truth is the same. But beware, some grid printed brick treated, can deal with the brick and didn't have off color, the processed looks will update, color is more shallow. So, in order to the overall effect, sometimes cannot handle with the grid printed pieces of light. Of course, this processing fee is not low. Printing is very difficult to remove small make up remind grid, this thing is to let a person very depressed. Small make up in this want to remind is: in the process of production, storage, transportation, processing, some printed link may be the cause of grid, will be more careful, avoid grid. For example, try to keep cool tile before packaging, as far as possible, with better anti-fouling wax in packaging as far as possible don't adobe brick molding surface, as far as possible back to back, or face to face. Especially when processing factory processing, although when processed reason cannot determine the lattice seal, also hope to factory after processing storage and packaging, try not to adobe brick molding surface. If processing plant in the process of machining, find a better solution, please tell us, be appreciated. Also hope that we forwarded a lot, let the boss see more of the plant. （ Ceramic tile grid)
ceramic floor tile tile company, device for producing ceramic floor tile, ceramic floor tile, and other ceramic floor tile, consisting of ceramic floor tile.
Guangdong Overland Ceramics Co., Ltd will deliver superior returns to our shareholders by tirelessly pursuing new growth opportunities while continually improving our profitability, a socially responsible, ethical company that is watched and emulated as a model of success.
Equipping tile company with innovative technology and updated processes will simplify daily compliance duties so that they can focus on attracting, retaining, and developing the most engaged workforce possible.
Guangdong Overland Ceramics Co., Ltd can assure you that we never compromise on our quality standards and are one of the best in the market at present.
Guangdong Overland Ceramics Co., Ltd’s model also predicts (i) a positive effect of management on firm performance; (ii) a positive relationship between product market competition and average management quality (part of which stems from the larger covariance between management with firm size as competition strengthens); and (iii) a rise (fall) in the level (dispersion) of management with firm age.