Ceramic tile paste what to use

Ceramic tile adhesive is used for stickup ceramic tile, tile, floor tile decorative materials of modern decoration new materials, etc. （ Ceramic tile paste) At present, in the construction industry, domestic outfit, there are still part of the master used to use pure cement paste stickup ceramic tile. Small make up to tell you in the short term may not have what problem, but as time goes on, the devil. Reason: cement, ceramic tile scourge for heat bilges cold shrink coefficient difference in ceramic tile cracks, tile of main reason is that the pure cement paste heat bilges cold shrink coefficient is big, thermal considerable tension, easy to result in the crack of the ceramic tile, while the tensile strength of the contractions can make the separation of cement paste and ceramic tile, prone to empty drum, time grows, the falling brick problems. Like to blow the balloon, each balloon expansion coefficient has a limit, if beyond the limit to blow, will burst; And when deflated, the balloon will deviate from the original position constantly with shrinkage. Carefully selected, the ceramic tile of buying back problems once appear crack, off brick, nature is not worth the cost! Solution: 1. According to the proportion in the cement mixing sand, ceramic tile is soaked, seam construction & ndash; — Improvement of traditional construction used in cement paste mixed sand, ratio for cement commonly: arenaceous = 1:2. Before construction to soak of ceramic tile, construction with cracks and construction according to the requirements of ceramic tile specification. Note: the master have to increase the paste, adding glue, glue chemical irritants, harmful to human body, careful! 2. Use ceramic tile adhesive or mortar rubber & ndash; — More scientific and effective method of special ceramic tile adhesive is modified mortar, cement and sand reach the best mixing and matching, and then by adding additives and the powder, can greatly improve the cohesive force of cement mortar, balance the heat bilges cold shrink coefficient of cement mortar and ceramic tile, as long as leaves according to the requirements of ceramic tile aperture, standard construction, can effectively prevent the cracking, empty drum, the phenomenon such as brick, thin layer construction method can greatly improve construction efficiency. LeiBangShi adhesive mortar is the latest company research and development of patented products, made of high quality ceramic tile adhesive concentration, adhesive mortar mixed with water, cement, sand percentage can play a role similar to that of the ceramic tile adhesive, and can reduce the transportation problem, construction is convenient, economical and practical. 3. Details & ndash; — Detail decides success or failure of A and asked teacher according to the instructions on the use of the ceramic tile construction; B, do waterproof before wall tile; C, special material handled with care. Family is decorated in occasionally with some marble slabs or blocks of stone. Because the material quality, the area is large, the more likely to fall off, thus proposed the use of ceramic tile in the shop is stuck or mortar adhesive, and handle in accordance with the related instructions carefully, to avoid unnecessary loss and trouble. （ Ceramic tile paste)
are present in just about every facet of modern life.
Looking for a company to handle your tile company ceramic floor tile? Visit Overland Ceramics today for more information.
With wide range of [分类关键词] products of top quality in offer, Guangdong Overland Ceramics Co., Ltd will definitely be your best option for tile company solution. Do feel free to contact us at Overland Ceramics.