Decorate in household in, the ceramic
tile is not less bai du materials building materials.
Whether living room floor, zhi, room, bathroom, kitchen or dao balcony space more often to use it.
In the face of such a commonly used building materials, to master these little common sense, let you face a difficult problem to deal with ease!
Why tiles from top to bottom in the shop is stuck?
After the general contractor will spread wall brick, tile, so that when the floor tile not affect wall brick, don't delay the construction period.
wall brick generally since Yang Angle or Windows and doors, according to the bottom-up, from left to right order.
The
ceramic tile of vitrified bottom embryo without bubble water?
Because the bottom embryo vitrified tile is not bibulous, that this kind of ceramic tile is generally going to construction of special ceramic tile adhesive.
Bubble water according to the water absorption of ceramic tile, ceramic tile of bubble water a bit of time difference, the worker is generally know it is important to note that the ceramic tile of bubble water merchants are not accept merchandise for return, therefore, must be charged bubble water, good master calculation quantity how many, how much bubble so as not to cause waste.
Metope: why do you want to check clear before tile?
Clear wall in front of the tile to check, if the wall has a crack must first for processing.
Construction group in the brick wall brick, often need to blow be bored with child on the wall, but if it will not be bored with child scooping out it directly tile, potential safety hazard is very large.
On the cement strength big, be bored with child would cement, cause the loss of ceramic tile.
Ceramic tile shop sticks ceramic tile, more should be timely to the parting of excess adhesive material scraping clean, with a wet cotton cloth to wipe the stains out of brick, don't wait for bonding material of dry wipe again after cleaning, it not only can not clean, if shaving with good thing and will damage the glaze layer.
After bonding materials such as coagulation, can use white cement, gypsum mortar or paste will joint brush again, with cotton yarn will brush divide evenly mortar, filled.
The shop is stuck why need to seam the shop is stuck?
Ceramic tile shop sticks are normally need the shop is stuck, seam is one of, the account to prevent hot cold.
Second, prevent the ground subsidence.
Third, to prevent the downstairs downstairs after decorate wall there is a huge shock.
Generally seamless brick wall brick, polishing tile, when the shop is stuck, 1 - seam
1.
Around 5 mm, not less than 1 mm, you can use the cross as a reference.
Archaize brick is a bit wide, usually 3 -
5mm。
Floor tile,
Such as bo changes a brick, etc. )
General 1 seam.
5 -
About 2 mm.
The wall brick of the balcony commonly seam is 5 mm or so.
How many hours in the shop is stuck, to walk on the surface of the brick?
General shop sticks ceramic tile is the height of the shop is stuck, toilet of about 3 mm height is lower than the kitchen food sitting room, the floor tile of toilet is best, 300 * 300 specifications that favour the slope, flow fast is not water.
Floor tile laying is completed, to cover the tile with cardboard and so on, and at least 24 hours before they can walk on the surface of the brick.
Another special note that 12 hours after the shop is stuck, should knock brick surface inspection, if discover free drums shall be laid again.
Floor tile shop sticks to finish 24 hours rear can walk, wash thoroughly, mixed with water cleaner, clean ceramic tile clean thoroughly.
Currently there is a global trend growing. People are more conscious about ceramic floor tile and are seeking alternatives to traditional solutions.
Overland ceramics is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.
If we avoid overselling tile company ceramic floor tile and capabilities, you gain credibility and earn trust. We did not want to jeopardize our ingrained preference for humility.
