Here for everyone to introduce bo changes a brick and the characteristics of the polishing brick, hope I can help to you.
Bo changes a brick is a kind of high temperature ceramic brick, is a kind of hard
ceramic tile of all.
Sometimes were scraping scratch polishing brick, bo changes a brick is still intact.
High but the price of this brick, bo changes a brick has the following characteristics: 1, high temperature sintering, im totally porcelain became mullite, such as a variety of crystal, stable physical and chemical performance, corrosion resistance, fouling resistance is strong, is like new.
Because of natural granite formation, time, degree of weathering is not the same, result in different density, strength, using two years gradually lose luster, rough surface wear, difficult to clean, affect beautiful.
2, colour is gorgeous, soft, no obvious color difference.
And natural granite, due to the time of rock, rock the different shades of color difference is bigger.
3, no harmful elements.
Granite is a natural mineral, buried deep in the earth's crust for a long time, without the high temperature sintering, therefore contain traces of radioactive elements, such as long-term exposure will harmful to health.
4, thickness is relatively thin, carrying high strength, light brick, building load reduced.
Low and the intensity of natural granite, bulky, and increase the load of the building, and will bring transport process, the shop is stuck a series of difficulties.
5, the flexural strength is greater than 45 mpa.
The granite is about 17 - flexural strength
20mpa。
Polishing brick is the brick tile body surface polished and become a kind of shining brick, belong to the tile of a kind.
Is relative to connect body brick and character, polishing brick is much more bright and clean surface.
Polishing brick hard wear-resisting, suit in the most and interior space in addition to the bathroom, the kitchen used in used in the balcony, for example, exterior wall decoration, etc.
On the basis of the USES ooze to spend a technology, polishing brick is ok make result of wood of all sorts of copy stone, copy.
Polishing brick has the following characteristics: 1, without off color, natural stone material, due to the time of rock, rock depth different color difference is bigger, polishing brick, pesto with batch of product design and color is consistent, basic without off color.
2, no radioactive elements, minerals, natural stone, without high temperature sintering, it contains individual traces of radioactive elements, long-term exposure can be harmful to human body, polishing brick will not cause harm to human body.
3, brick thin, light weight, natural stone material due to the low strength, so the processing thickness is larger, bulkier, increasing the weight of the floor of the building load, form a potential threat, costs, and increase the transportation, the shop is stuck, etc.
4, flexural strength, natural stone material due to natural, timber, weathering, etc is not the same time, leading to close degree, different intensity.
Polishing brick by thousands of tons of hydraulic press pressing, then through high heat sintering, high strength.
5, prevent slippery ceramic tile ground safety non-slip is very important especially in the child's family also recognized the antiskid effect of ceramic tile.
Polishing brick surface is bright and clean bright, many consumers believe that prevent slippery effect is poor, one thousand sprinkle water increased the safe hidden trouble, so avoid, so we have to choose the ceramic tile of dumb light of light inside collect.
In fact, all of the polishing brick is slippery, if there is soil on brick can slide, water can acerbity instead, so just be daily cleaning will not affect its prevent slippery effect.
On the skid resistance, polishing tile and tile of dumb light of is the same.
Bo changes a brick and polishing brick difference: actually polishing tile and bo changes a brick is porcelain brick, is composed of quartz sand, mud fire, and then use abrasive polishing brightness, as bright as mirror smooth surface, polishing brick is just according to the polishing process named bo changes a brick is according to the product in the process of firing a particular physical and chemical process.
Difference between actually is bibulous rate, bibulous rate is lower than 0.
5% of the ceramic called bo changes a brick, polishing brick is bibulous rate is lower than 0.
5%, also belong to bo changes a brick, polishing brick is bo changes a brick to mirror polishing.
Bibulous rate is lower, the vitreous degree, the better, the better the performance of the physical and chemical products, if the polishing brick bibulous rate is less than or equal to 0.
1%, belong to fully promote, is a good product in ceramic tile products.
For the study, researchers defined Overland ceramics as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.
Interested in the that create such effect? Come to Overland ceramics to see some items.
ceramic floor tile has become a serious problem for an increasing number of people around the world, that's why highly effective are developed by Guangdong Owenlai Ceramics Co., Ltd.
