Everyone know floor
tile dry construction technology, I think a lot of people don't understand this problem, the following will detail dry hanging wall ceramic tile construction what is the content of the whole process.
Dry hanging wall ceramic tile of the whole construction process is actually what 1, making floor tile: first, the color of the floor tile selected according to the colorimetric method to carry out the classified, installed on the same surface colorful floor tile is consistent, and unique abrasive fixed on the bench drill according to the size of the design and engineering drawings.
Open hole will paint floor tile negative polyurethane resin adhesive.
Brush on the first floor tile in the past, the data written in the book of the floor tile and volatility embers and remove stains on the floor tile.
2, dry hanging wall ceramic tile -
The dividing line of metope and install the framework: the first clear dry hanging the structure of ceramic tile surface.
After that, the framework of the connection to the main structure, on the basis of axis and elevation point and placement.
Application level control flatness, with accurate measurement gauge lines and logo on metope and bearing beam.
First, the vertical round steel parts into metope, clear vertical ceiling keel strong point.
Level after implantation vertical secure channel steel, steel Angle of position on the vertical steel safe passage.
3, dry hanging wall ceramic tile -
To install a total construction area of two at the top of the
wall tile: using line, hanging bisectrix from the top to the bottom and placed on the road or in a stationary point.
When looking for vertical, generally in accordance with the table reference back to and from the bottom layer at first, the level and vertical position of the side of the base layer on table size and the total width of open interior space.
4, the installation of accessories: according to the release of black ink line and the design of the specifications of the hanging drop model and the total number of installed hanging pendant.
In addition, be sure to hard to accurately measure wrench, examine the force expansion bolt and the connecting nut to consider design quality rules.
5, dry hanging wall ceramic tile -
Connection board: on the surface of the plate side holes, adding amount of epoxy resin adhesive compound is suitable for filling and into fixed pin.
Proportion of epoxy resin adhesive compound make sure there is plenty of initial setting, because to be clear, specific for 4 - commonly
8 hours advisable, in order to avoid too dry and brittle fracture fixation, dry solid and release slowly.
6, dry hanging wall ceramic tile
The installation of floor tile: generally, it from the main building facades, or the main display information surface at first.
It is installed in a plane from the bottom up successively.
To minimize the crossing guard work in order to reduce error and wary of the floor tile color consistency.
After installation of each layer, adjust the deviation and key to authenticate the holding force of anchor bolt of the compressive strength.
Net weaving simple introduced the whole process of dry hanging wall ceramic tile, has decorated above you can refer to the text.
Thank you for the last watch of brunei online information, see you next time!
are an important part of the society and they come in handy in any place where there are ceramic floor tile in need of ceramic floor tile.
If you cannot find the specific type of that is best for your business in the above mentioned guide, you can visit Overland Ceramics for the best consultants specializing in this field, who can recommend the your are looking for. Customization is warmly welcomed here.
Guangdong Overland Ceramics Co., Ltd has extented its range of manufacturing scale, which satisfys customers' needs.
tile company provider at Overland Ceramics offers a wide variety of in many options. quality is absolutely ensured if you choose us. welcome to visit our factory.
